USB

Plug & Play - No Driver installation required

Portable data storage with high-speed USB 2.0

Ethernet Network (via LAN or direct)

Direct connect the NETDISK to a single computer's Ethernet Port or to the Network via Switch or Router. (Connection driver installation required)

Storage for every authorized computer in the network

Easy installation ? no IP address to configure

No TCP/IP improves transfer rate and security

Compatible with most wireless access routers IEEE 802.3 a/b/g/n

eSATA

High Speed Leader

Plug & Play Access

Cable Included

Technical Specifications

HDD Capacity available in different capacities (tested up to 2TB)

Average Read Seek < 10ms (depending on HDD used)

Power Requirements 100~220 VAC, 50-60 Hz, 12V DC, 2.5A

Operating Temperature 5 to 50 °C

Storage Temperature -40 to 70 °C

Humidity 5 to 90%, non-condensing

Shock 2ms/63g (op.), 2ms/350g (non op.)

USB 2.0 Data transfer of up to 480Mbps

Ethernet Data transfer of up to 1000Mbps

eSATA Data transfer of up to 3.0G/s

Dimensions 6.4 H x 8.4 L x 1.9 W (inch) 161.3 H x 213.5 L x 48 W (mm)

Warranty 1 Year, Limited